1/4 ODF x 1/4 SAE Swivel Female Flare x Solder Adapter
Tubesize is listed as OD (outer-diameter) – to determine nominal sizesubtract 1/8”. JB recommends the use of compatible thread sealant andtightening 2-1/2 turns past hand tight.
Maximum Strength
JBuses the highest level of brass consisting of 65% copper and 35% zincwhich means high-tensile strength while resisting corrosion. The forgingprocess of fittings maximize strength and eliminate cracking. Manyimport fittings use less quality brass with lower copper content and as aresult have a much higher failure rate. Vacuum pressures of 5,000 psican be handled depending on the size, materials, and conditions. Longdryseal pipe threads minimize leakage and provide more clearance fortightening flare nuts.
Flexibility
JBbrass fittings can be used with copper, brass, aluminum, steel, andplastic tubes providing an acceptable flare can be generated with thematerial. JB’s heavy-duty ACR tube fittings generally conform to SAE,ASA and ARI standards for marine, hydraulic, and refrigeration service.Tube fittings are make and break, have good vibration resistance,economical and are easy to assemble. JB will provide flare fitting toSAE standard J513 whenever possible.
Made in the USA
JB Industries machines all brass fittings at their factory in Aurora, Illinois.
|
|
|
|
|
|
|
Product Features
| SWIVEL FEMALE FLARE x SOLDER ADAPTER |
| PART NO. |
SIZE |
QTY
|
| US5-44 |
1/4 x 1/4 |
1 |
| US5-66 |
3/8 x 3/8 |
1 |
| US5-88 |
1/2 x 1/2 |
1 |
| US5-1010 |
5/8 x 5/8 |
1 |
| US5-1212 |
3/4 x 3/4 |
1 |
|
|
|
|
|
